Chapter 1: Introduction
Front Panel
Figure 2: Front panel
Rear Panel
One DIP switch for the Link Fault Pass Through (LFP) feature. "ON" to enable
LLCF and LLR detection. "OFF" to disable. One DC 48V power socket for the
PoE Media Converter.
Figure 3: Rear panel
Link Fault Pass through (LFP)
The LFP function includes the Link Fault Pass Through function (LLCF/LLR) in
the DIP Switch design. LLCF/LLR can immediately alarm administrators to
problems of linked media and provide efficient solutions to monitor the net.
The DIP Switch settings can disable or enable the LFP function.
MC100FX-TX-PoE Media Converter User Manual
5