Table of Contents
Advertisement
Chapter 2
Hardware
Installation
Installing the Converter
Please follow these steps to install the PoE Media converter:
1.
Turn off the power of the device/station in a network to which the
MC100FX-TX-PoE will be attached.
2.
Ensure that there is no activity in the network.
3.
Attach a fiber cable from the MC100FX-TX-PoE to the fiber network. TX,
RX must be paired at both ends.
4.
Attach a Cat. 5 UTP cable from the 10/100Base-TX network to the RJ-45
port on the MC100FX-TX-PoE.
5.
Connect a 48V DC power adapter (not supplied) to the MC100FX-TX-PoE
and verify that the Power LED lights up.
NOTE:
This product is intended to be supplied by a UL Listed Direct Plug-In
Power Unit marked "Class 2" or "LPS" and output rated 48 VDC.
MC100FX-TX-PoE Media Converter User Manual
9
Advertisement
Table of Contents
