Related Manuals for GE Security MC100FX-TX-PoE
Summary of Contents for GE Security MC100FX-TX-PoE
-
Page 1: Media Converter
Security MC100FX-TX-PoE Media Converter User Manual P/N 1069178 • REV 1.01 • ISS 03MAR10... - Page 2 Any similarity to names and addresses of actual businesses or persons is entirely coincidental. Trademarks and GE and the GE monogram are trademarks of General Electric patents Company. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.
- Page 3 Manufacturer GE Security, Inc. HQ and regulatory responsibility: GE Security, Inc., 8985 Town Center Parkway, Bradenton, FL 34202, USA EU authorized manufacturing representative: GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands European Union directives 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
-
Page 5: Table Of Contents
Content Chapter 1 Introduction 1 Package Contents 2 Introduction 2 Chapter 2 Hardware Installation 9 Installing the Converter 9 PoE functions 10 Chapter 3 Specifications 13 MC100FX-TX-PoE Technical Specifications 13 Cable Connection Specifications 15 MC100FX-TX-PoE Media Converter User Manual... - Page 6 MC100FX-TX-PoE Media Converter User Manual...
-
Page 7: Introduction
• Power over Ethernet: Power Sourcing Equipment (PSE), PoE Injector Providing both PoE and Fiber Optical interfaces, the MC100FX-TX-PoE is ideal for service providers, campuses and public areas requiring deployment of PoE devices at wireless access points for IP-based surveillance cameras or IP phones easily, efficiently and cost effectively. -
Page 8: Package Contents
TX-PoE) and PoE PD (Powered Device) to transfer data and power simultaneously. The maximum distance between the Injector (MC100FX-TX- PoE) and PoE PD is 100 meters. When a MC100FX-TX-PoE is installed, it combines the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3af Power over Ethernet Injector. -
Page 9: Model List
Model List The PoE Media Converter model is: • MC100FX-TX-PoE: with on board SC/Multi-mode fiber connector, up to Media Converter Features • Complies with the IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3af Power Over Ethernet standard •... - Page 10 Chapter 1: Introduction Overview Figure 1: Product Views MC100FX-TX-PoE Media Converter User Manual...
-
Page 11: Front Panel
The LFP function includes the Link Fault Pass Through function (LLCF/LLR) in the DIP Switch design. LLCF/LLR can immediately alarm administrators to problems of linked media and provide efficient solutions to monitor the net. The DIP Switch settings can disable or enable the LFP function. MC100FX-TX-PoE Media Converter User Manual... - Page 12 LED lit = established link LED unlit = no link If the connection breaks, the MC100FX-TX-PoE will send a link loss forward to the switch or hub that generates a trap to the management station. The administrator can then determine the source of the problem.
- Page 13 Units are shipped with the LFP function disabled (OFF). Link Loss Return (LLR) The fiber ports of MC100FX-TX-PoE have been designed with an LLR function for troubleshooting a remote connection. LLR works in conjunction with LLCF. When the LFP function is enabled, the port's transmitter shuts down when its receiver fails to detect a valid receive link.
- Page 14 NOTE: The LFP function is disabled by default. This feature can be turned on via the side DIP-switch. If you are not familiar with Network installations and diagnostics, please leave it in the default position. MC100FX-TX-PoE Media Converter User Manual...
-
Page 15: Hardware Installation
MC100FX-TX-PoE will be attached. Ensure that there is no activity in the network. Attach a fiber cable from the MC100FX-TX-PoE to the fiber network. TX, RX must be paired at both ends. Attach a Cat. 5 UTP cable from the 10/100Base-TX network to the RJ-45 port on the MC100FX-TX-PoE. -
Page 16: Poe Functions
Before installation, we recommend that you verify your network environment. If there are any IEEE 802.3af devices that need power, then the MC100FX-TX- PoE can provide power for this Ethernet device. The MC100FX-TX-PoE can use an AC-DC adapter (not supplied) with DC 48V input and injects this DC power into the pin of the twisted pair cable (pair 1, 2 and pair 3, 6). - Page 17 Chapter 2: Hardware Installation The MC100FX-TX-PoE provides the easiest way to power your Ethernet devices such as a GE Security IEEE 802.3af Power over Ethernet Splitter with an Internet Camera or PoE Wireless Access Point installed in the Network. Figure 8: Installation schematic...
- Page 18 Chapter 2: Hardware Installation MC100FX-TX-PoE Media Converter User Manual...
-
Page 19: Specifications
Chapter 3 Specifications MC100FX-TX-PoE Technical Specifications The MC100FX-TX-PoE comes with the following standard features: • Standard: IEEE 802.3u, 10/100Base-TX, 100Base-FX IEEE 802.3af Power over Ethernet • Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568 with PoE One Fiber-optic, 1310nm wavelength, connector-type vary with model •... -
Page 20: Led Indicators
Fiber: MM: 50/125 (m or 62.5/125 (m optic fiber NOTE: When connecting to Router, Bridge, Switch, or Hub, please refer to that device's Technical Manual. LED Indicators System Color Function Green Indicates that the device is receiving power MC100FX-TX-PoE Media Converter User Manual... -
Page 21: Cable Connection Specifications
Twisted Pair Half / Full Node to Node 100 meters Node to Switch/Hub Multi-Mode Converters MM Half Node to Node 412 meters Node to Switch MM Full Node to Node MC100FX-TX-PoE: Node to Switch 2 kilometers MC100FX-TX-PoE Media Converter User Manual... - Page 22 RJ-45 cable pin assignment Figure 9: Cable pin labels There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight and crossover cable connection: MC100FX-TX-PoE Media Converter User Manual...
- Page 23 Please make sure your connected cables have the same pin assignment and color as above before deploying the cables into your network. Fiber Optical patch Cables: Standard Fiber Type Cable Specification 100Base-FX Multi-mode 50/125μm or 62.5/125μm (1310nm) MC100FX-TX-PoE Media Converter User Manual...