Operating The Handset - Gigaset 4010 Classic Operating Instructions Manual

Gigaset 4010 Classic, GBR, A31008-G4010-J101-1-7619

G
5 h

Operating the handset

The display is protected by a plastic film.
Remove the protective plastic film!
Inserting the batteries
Insert the batteries ensuring correct polarity – see figure on left.
Replace cover and push gently upward until it clicks into place.
To open, press the grooved area on the cover and slide back.
¬
Only insert the recommended rechargeable batteries (see
page 46). Never use ordinary (non-rechargeable) batteries or
health risks and personal injuries cannot be excluded.
Never use non-Siemens charging units as these can damage
the batteries.
Placing the handset into the base station and charging the
batteries
Before activating your handset, place it in the base station with the dis-
play facing upward. After approx. one minute, the handset's internal
number is displayed (e.g. " INT 1 ").
¬
For information on how to register further handsets (bought
additionally), see page 27.
Leave the handset for approx. five hours in the base station to charge
the batteries. The charging status icon flashes on the handset indicat-
ing that the batteries are being charged:
§
Batt. empty (symbol flashes)
¦
1
Batteries / charged
3
Note:
Your Gigaset is now ready for operation. Please set date and the time
(see page 9), so that the time of incoming calls can be noted correctly.
vorberei.fm
Preparing the telephone
¥
2
Batt. / charged
3
¤
Batt. fully charged
11.07 .01
7