Zr2440W Model - HP ZR2040w User Manual

ZR2440w Model

The default input on the ZR2440w is DisplayPort and the scan order is initially set to DisplayPort,
DVI-D, HDMI. You can change the current input, the default and the scan order through the OSD.
Pressing the
submenu.
Figure 3-2
Control
1
2
3
4
OK
5
6
+ button on the front of the monitor will take you directly to the OSD source-control
ZR2440w Front Panel Controls
Menu
Minus
Plus/source
OK
Power
Power LED
Function
Opens, selects or exits the OSD menu.
If the OSD menu is on, press to navigate backward through
the OSD menu and decrease adjustment levels.
If the OSD menu is on, press to navigate forward through
the OSD menu and increase adjustment levels.
If the OSD menu is inactive, press to activate the source
button that chooses the video signal input (VGA, DVI, or
DisplayPort).
If the OSD menu is on, press to select the highlighted
menu item.
Turns the monitor on or off as long as the master power
switch on the rear panel is on.
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
No light indicates power off, or normal operation if the LED
is suppressed.
Overview of Operation 25