HIKVISION DS-2CC5197P-DG1 User Manual page 36

Day/Night High-definition Box Camera· User Manual
1~ Area 4) to be configured.
(3) Set the motion detection for the selected area to ON.
(4) Set the area size and position by defining the top/bottom
and left/right values. The configured area can be viewed
on the screen.
(5) Press RETURN to back to the MOTION DET SETUP menu.
 Configuring area for type2:
Note: The full-screen motion detection is configured by default
when the motion detection is set to Type2,
 Configuring area for type3:
(1) Move the cursor to AREA SET, and press the menu
button to enter the area settings menu.
(2) By default, there are 12 × 8 alarm grids on the full screen.
You can move the menu button up/down/left/right to
switch to different grids. You can press the menu button
to clear the selected alarm grid or press the button again
to re-select it as the motion detection area.
(3) Press and hold the menu button to back to the MOTION
DET SETUP menu.
5. Move the cursor to SENSITIVITY and set the value to level
0~7.
6. Press RETURN to back to the previous menu.
35