Fisher & Paykel ActiveSmart E402B Installation Instructions And User Manual page 18

Installation instructions
16
Important!
All connections must be checked for leaks.
■ ■
Ensure white 6 mm (¼") tubing is routed away from sharp objects, sharp corners (beware of
■ ■
kinking tube as this will stop water flow), clear of the refrigerator unit compartment and not in a
location where it can be squashed.
Ensure all push-fit connections are firmly pushed into place. The tube should be pushed in 16 mm
■ ■
(5/8") before reaching the stop.
If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully inserted to
■ ■
avoid leaks.
To remove tube from connection points, turn off the isolating tap, push in the collet and gently
■ ■
pull tubing at the same time.
The water filtration system is tested and certified by NSF International against NSF/ANSI
Standard 53 for the reduction of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane,
Mercury, P-Dichlorobenzene, Toxaphene & Turbidity; against Standard NSF/ANSI 42 for the
reduction of Chlorine Taste and Odour and Nominal Particulate Class I to a capacity of 2,838
Litres (750 gallons).
Diagram 9
Fig.9 Connection to water supply