Fisher & Paykel ActiveSmart E402B Installation Instructions And User Manual page 15

Important!
DO NOT use with water that is microbiologically unsafe or of unknown quality.
■ ■
WARNING – connect to potable water supply only.
■ ■
DO NOT install on line pressure above 827 kPa (119 psi) or below 150 kPa (22 psi).
■ ■
DO NOT use on hot water supply (25°C (77°F) max).
■ ■
DO NOT cut any length of tube shorter than 200 mm (8").
■ ■
DO NOT install near electrical wires or water pipes that will be in the path of drilling when
■ ■
selecting the location of the filter system.
DO NOT mount the filter in such a position that it will be struck by other items, such as
■ ■
wastebaskets, etc.
DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure to light can
■ ■
weaken plastic components.
DO NOT install the filter in a location that is susceptible to freezing temperatures as damage to
■ ■
the filter housing could occur.
DO NOT screw the filter to the refrigerator.
■ ■
DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling cavity.
■ ■
AVOID contamination of pipes during installation.
■ ■
DO NOT use copper tubing. The plastic tubing supplied should always be used.
■ ■
DO NOT continuously dispense water for a period longer than 2 minutes.
■ ■
Installation instructions
13