Instruction Of The Installation; Assembling The Mobile Stand - Panasonic TY-ST42PT3S Installation Manual

Instruction of the installation

Assembling the mobile stand

1
Insert the supprots into the slots on the upper side of stand base, and
then fix them from below using the four
2
Slide the shelf, with the supports in the slots, down to the required
height. Choose the locations of stopper holes to match the required
height. Then fix the shelf using the four
3
Insert the holder into the supports, and fix it with the four
bolts.
screws and spring washers.
Front
screws.
When installing the stand,
provisionally fasten all
bolts and screws first,
and then fasten them to
complete the assembly.
Bolt (M8)
Support
1
2
Choose the locations of
the stopper holes to
match the required height.
1) height of 500 mm
2) height of 350 mm
Assembly screw (M6-16)
and spring washer x 4 each
Be sure to assemble on a
stable horizontal surface.
Assembly screw(M5-15)
3-
3