Hot Plug Of Storage Card; Memory Space; Power On/Off And Device Reset; Connect To Wireless Networks (Wi-Fi) - Prestigio MultiPad 8.0 Pro Duo User Manual

2.3 Hot plug of storage card

Please do not hot plug the storage card when using or browsing its files.
For example, when you are running the Music/Movie Player/ Gallery apps, the storage card could be
damaged and files on it might become corrupt if you take out the storage card without proper
preparation. As for details of inserting/removing storage card, see 2.2 Use the storage card.

2.4 Memory space

The capacity of built-in flash chip is 8GB. The device contains several memory partitions: Flash storage,
Apps Storage, Internal and External (if connected) SD cards. The space is partitioned to store apps,
settings and user data. A part of storage will be reserved for system resources and wouldn't be available
for user. The exact size of available memory may vary depending on Firmware version.
MultiPad supports extended storage – micro SD cards of 32GB maximum capacity.

2.5 Power on/off and Device Reset

1. Power on: press down the Power Button and hold it for a while to turn on the device when the
battery is full enough.
2. Power off: press down the Power Button and hold it for about 3 seconds and then select Power Off
in popup menu to turn off the device.
3. Screen Lock：short-press down the Power Button once to shutdown the screen to save battery life.
Short-press down the Power Button again to activate the lock screen. After unlocking, the device will
resume the screen before locking.
4. Reset: Use a paper clip to press the reset button in case you need to perform forced reset of device.

2.6 Connect to wireless networks (Wi-Fi)

To connect to a Wi-Fi wireless network, you should do the following:
1. Tap Settings on the Home screen or go to the Settings in other way (e.g. via Notification bar or
Application list);
2. Turn Wi-Fi switch on in Wireless & Networks section;
3. The network names and respective security settings of detected Wi-Fi networks are displayed in
the Wi-Fi networks section;
4. Tap a Wi-Fi network to connect. If you select an open network, you will be automatically
connected to the network. If you select a secure protected network, enter the Password and then tap
Connect.
Depending on the network type and its security settings, you may also need to enter more information
or choose a security certificate.
5. After successful connection, the Wi-Fi connected icon
USER MANUAL | MultiPad 8.0 Pro Duo/PMP5580C_DUO
will appear on the status bar.
7