Dometic WDCVLW Installation & User Manual page 6

SAFETY PRECAUTIONS

DO NOT wash carpets.

BURN HAZZARD! Be careful of scalding when washing machine drains hot wash water.

Never refill the water by hand during washing.

After the program is completed, open the door after the bell.

Always follow the fabric care instructions recommended by the clothing manufacturer.

DO NOT use the washing machine if it has a worn power cord or loose plug. Contact an author-
ized service agent.

DO NOT operate the washing machine if any guards, panels and /or fasteners except transport
fixing bolts have been removed. Check the fill hose connections on a regular basis to ensure that
they are tight and not leaking.

DO NOT operate the washing machine if parts are missing or broken.

DO NOT touch the door if washing at high temperatures.

DO NOT use powdered detergents! Use caution and limit quantities of decontaminant and
bleach used to pretreat stains and clothes.
Note:

The Important Safeguards and Warnings indicated in this manual do not cover all possible condi-
tions which may occur. Common sense, caution and care must be exercised when installing,
maintaining or operating this appliance.

Always contact your dealer, distributor, service agent or the manufacturer about any problems or
conditions that you do not understand.
6
TROUBLESHOOTING TIPS
Troubles Reason
Washing machine does
not start up.
Door does not open. Machine's safety protection
design is working. Inside tem-
perature above 122°F.
Heating fault. Negative temperature coeffi-
cient thermistor (NTC) sensor is
damaged and heating pipe is
aging.
Water leakage. The connection between inlet
pipe or outlet hose and tap or
washing machine is not tight.
Drain pipe in the room is
blocked.
Water is overflowed from The inlet pipe is not connected
the bottom of the machine. firmly.
Outlet hose has water leakage.
Indicator or display does Power is disconnected.
not light. PC board has problems.
Harness has connection prob-
lem.
Detergent residues in the Washing powder is dampened.
box. Using powdered detergent
Washing effects are not The clothes are too dirty.
good. Insufficient detergent quantity.
Abnormal noise, or vibra-
tion.
Solution
Check if the door is closed tightly.
Check if the power plug is inserted
properly.
Check if water supply tap is open.
Check if button "Power" is pressed.
Check if button "Start/Pause" is
pressed.
Disconnect the power.
Can normally wash the clothes.
Only cannot wash with heating.
Contact the service center promptly.
Check and fasten water pipes. Clean
up outlet hose and ask a specialized
person to repair it when necessary.
Fix the inlet pipe.
Replace the drain hose
Check if the power is shut down and
power plug is connected correctly.
If not, please call up service line.
Clean and wipe the box.
Use liquid detergents.
Select a proper procedure. Add the
proper detergent quantity according to
the instructions in detergent package.
Check if the (transit bolts) have been
removed. If cabinet is installed on the
solid level floor. Check if there are any
heavy or metal articles inside.
Check if the legs in the washing ma-
chine are adjusted level. See page 6.
23