Planet ICA-107 User Manual page 43

Web Port
Apply
PPPoE
Enable PPPoE
User Name
Password
MTU
Apply
Dynamic DNS
Enable DDNS
Provider
Domain Name
User Name
Password
Apply
UPnP
Enable UPNP
Apply
The IP Camera support web connection, the default web port is
80. If you change the web port from 80 to other port, such as
8080, you must type http://192.168.0.20:8080 to connect the
camera through the web browser.
When you finish the "LAN" configuration, click "Apply" to apply the
setting.
Enable or disable PPPoE function of the IP Camera.
Enter the User Name for the PPPoE account.
Enter the Password for the PPPoE account.
Maximum Transmission Unit (MTU) is the largest frame that
could be transmitted through the PPPoE connection. The MTU is
specified in octets (eight-bit bytes). If there is no other request,
please leave it as default value.
When you finish the "PPPoE" configuration, click "Apply" to apply
the setting.
Enable or disable DDNS function of the camera.
Several companies provide DDNS service. The IP Camera
supports the service from DynDNS company.
The domain
"registername.dyndns.com". Enter the domain name that you
register for the camera from DynDNS web site.
Enter the login name for the DDNS service.
Enter the password for the DDNS service.
When you finish the "Dynamic DNS" configuration, click "Apply" to
apply the setting.
Enable or disable UPnP function of the camera.
When you finish the "UPnP" configuration, click "Apply" to apply
the setting.
39
name given by DynDNS is