Scrolling Feature - DICE Silverline iPod Kit Installation Manual

Scrolling feature - in SAT emulation, Mode 6
To set and change scrolling feature press CAT/FLDR button repeatedly until Mode 6 is selected . Change options by
pressing Seek/Track or turning the Tune dial. After setting the desired feature turn off the ignition for at least 50
seconds to engage the new selection.
CAT
FLDR
Certain amount of blinking is normal on some radios when the scrolling feature is on.
Firmware version information - in SAT emulation, Mode 6
Firmware versions are displayed while in Mode 6. This may be needed by a support technician if troubleshooting is
necessary. Having this information ready before requesting technical support may expedite the troubleshooting
process.
XM 1 001
SHORT STAT
CAR 1.00
30
XM 1 001
SHORT STAT
SOFTWARE VERSI
XM 1 001
SHORT STAT
IPOD 1.00
(Only with Audi/VW-SAT kit)
or
SEEK
TRACK
TUNE
XM 1 001
SHORT STAT
AUX 1.00
XM 1 001
SHORT SCROL
SOFTWARE VERSI
XM 1 001
LONG STAT
SOFTWARE VERSI
XM 1 001
LONG SCROL
SOFTWARE VERSI
XM 1 001
SHORT STAT
CORE 1.00