Thermador T30IF Series Use & Care Manual page 19

5 Push the filter cartridge with the
cap in a horizontal position all
the way into the opening in the
base panel.
6 Rotate the filter cartridge by
90 -180 gently in a clockwise
direction until the cap is in a
horizontal position.
After changing the filter, reset
i
the filter display.
The appliance might be used
i
without a "UltraClarity" water
filter. If you choose this option
replace the water filter by a
water filter substitute cartridge.
To purchase a water filter
substitute cartridge contact your
local dealer or call
1-800-578-6890.
Resetting the filter
display
If the filter display is not reset,
i
the next required filter change
cannot be signalled by the
display.
After each filter change:
3 sec.
q Simultaneously hold down the
SUPER and ICE buttons for
3 seconds.
Deactivating the filter
display
The appliance might be used
i
without a "UltraClarity" water
filter. If you choose this option
replace the water filter by a
water filter substitute cartridge.
In this case the filter display
might be deactivated to prevent
filter change messages.
To purchase a water filter
substitute cartridge contact
your local dealer or call
1-800-578-6890.
d
WARNING
To avoid serious illness or death,
do not deactivate the filter display
while using an "UltraClarity" water
filter.
To deactivate the filter display:
3 sec.
q Simultaneously hold down the
SETUP and ICE buttons for
3 seconds.
Re activate the filter display by
i
pressing the SUPER and ICE
buttons for 3 seconds
simultaneously.
d
19