Simulator; System Status - Humminbird 561 Operation Manual

Simulator

Use Simulator to learn how to use your Fishfinder before taking your boat on the
water. The Simulator is a very powerful tool that provides a randomly-updated
display which simulates on the water operation.
A message will appear often on the display to indicate Simulator mode.
To exit Simulator, power off your Fishfinder.

System Status

Use System Status to view system connections and to conduct a unit self-test.
After you select System Status from the Start-Up Options Menu, press the
VIEW key to display the following options:
• Self Test
• Accessory Test
To exit System Status, power off your Fishfinder.
Start-Up Options Menu
Simulator
We recommend going through this
manual while using the Simulator,
since all of the menus function and
affect the display in the same way as
they would in Normal operation. Any
menu changes you make will be saved
for later use.
NOTE: It is important to select Simulator
manually from the Start-Up Options Menu as
opposed to letting the Fishfinder enter
Simulator automatically (as it will if a
transducer is not connected and you do
nothing during power up).
31