Table of Contents
Advertisement
Simulator
Use Simulator to learn how to use your Fishfinder before taking your boat on
the water. The Simulator is a very powerful tool that provides a randomly-
updated display which simulates on the water operation.
A message will appear often on the display to indicate Simulator mode.
To exit Simulator, power off your Fishfinder.
System Status
Use System Status to view system connections and to conduct a unit self-test.
After you select System Status from the Start-Up Options Menu, press the
VIEW key to display the following options:
• Self Test
• Accessory Test
• GPS Diagnostic View
To exit System Status, power off your Fishfinder.
Start-Up Options Menu
Simulator
We recommend going through
this manual while using the
Simulator, since all of the menus
function and affect the display in
the same way as they would in
Normal operation. Any menu
changes you make will be saved
for later use.
NOTE: It is important to select
Simulator manually from the Start-Up
Options Menu as opposed to letting
the
Fishfinder
automatically (as it will if a transducer
is not connected and you do nothing
during power up).
90
enter
Simulator
Advertisement
Table of Contents
