Your Sim Card - Kyocera Hydro Vibe User Manual

3. Your phone will display a wireless charging screen instructing you to make sure the screen logo
is directly above the charging device center emblem.
4. Your phone shows battery charging status as it charges. When charging is complete, remove
your phone from the charger.
Note: Your phone will not charge correctly unless it is placed within the charging area.
Note: Make sure there is nothing between your phone and the charger. For more information on
wireless charging, see the user guide of your wireless charger.

Your SIM Card

Your phone comes with a preinstalled SIM (Subscriber Identity Module) card. If you need to reinstall
your SIM card, follow the instructions below.
Note: The SIM included contains information specific to your phone and should be retained with the
phone.
1. Insert your fingernail into the slit at the bottom of the battery cover and lift the cover up gently.
2. Remove the battery. You will see two slots just above the battery compartment. The bottom slot
is the SIM card slot; the upper slot is for the microSD card.
3. Hold the SIM card so that the metal contacts on the SIM card face down and the cut off corner
Get Started 4