Remove A Microsd Card; View The Microsd Card Memory; Format The Microsd Card - Kyocera Hydro Vibe User Manual

3. With the gold contacts facing down, slide the microSD card into the slot, pushing gently until it
snaps into place.
4. Place the battery back into its compartment and replace the battery cover.

Remove a microSD Card

Before removing your phone's microSD card, use the Storage settings menu to unmount the card.
1. Touch > > Settings
2. Read the disclaimer and touch OK to continue. Wait for "SD card safe to remove" to appear in the
Status bar.
3. Turn the phone off and remove the back cover. See
4. Lift the battery and remove it from the battery compartment.
5. Gently pull the microSD card out from the slot.
6. Place the battery back into its compartment and replace the battery cover.
Note: You can easily damage the microSD card by improper operation. Please be careful when
inserting, removing, or handling the microSD card.
Note: Make sure your battery is fully charged before using the microSD card. Your data may
become damaged or unusable if the battery runs out while using the microSD card.

View the microSD Card Memory

The Storage settings menu gives you access to your microSD card memory information.
With the microSD card inserted, touch
n
available memory space will be displayed.)

Format the microSD Card

Formatting a microSD card permanently removes all files stored on the card.
Tools and Calendar
> Storage > Unmount SD card.
Set Up Your
> > Settings
Phone.
> Storage. (The total and
141