TP-Link Archer T4U User Manual page 25

3.2.2.2. Enter a PIN into your AP device
1. Open TWCU and click WPS tab. Select Enter the PIN of this device into my access
point or wireless Router. In the field beside PIN, you will see the PIN value of the adapter
which is randomly generated. Click Connect to continue.
2. Open your Router's Web-based Utility and click WPS link on the left of the main menu.
Then click Add device and the following figure will appear. Enter the PIN value of the
adapter in the empty field beside PIN and then click Connect.
3. When Connect successfully appears on the screen (as shown in Figure 3-16), the WPS
configuration is completed. Or you can view the adapter's utility page to see whether the
connection has been successful (as shown in Figure 3-17).
Archer T4U TP-LINK Wireless USB Adapter User Guide
Figure 3-14
Figure 3-15
17