Using A Disc Menu - RCA Mobile DVD Player User Manual

To Load and Play a Disc
1. Lift up the LCD screen and position it to your liking.
2. Press the POWER button to turn on the unit.
3. Place a disc gently into the disc slot with the disc's label facing up (double-sided discs have
content on both sides, so you can place either side up).
The DVD player reads the disc's table of contents, and then one of following happens depending
on how the disc was programmed:
• No disc menu appears.
• The disc menu appears.
• The disc menu appears on the screen when you press PLAY/PAUSE.
• The disc starts playing automatically.
When you stop playing a disc, the DVD player remembers where you stopped. When you start
playing the disc again, it picks up where you left off unless the disc is removed, power is turned
off, or the unit is unplugged.

Using a Disc Menu

A disc is capable of having an on-screen menu that is separate from the DVD's on-screen status
banner. The disc menu might only contain a list of the titles and chapters, or it may allow you to
change features such as language and playback settings.
Although the content and operation of disc menus vary from disc to disc, the following example
will give you an idea of what to expect.
Chapter 1
Chapter 1: Connections & Setup
11