MSI MS-7357 (V1.X) Manual page 59

M emory Voltage
Adjusting the memory voltage can increase the DDR speed.
VTT FSB Voltage
This item allows you to set the FSB VTT voltage.
NB Voltage
Adjust the North Bridge chipset voltage.
SB I/O Power
Adjust the South Bridge I/O voltage.
SB Core Power
Adjust the South Bridge core voltage.
Spread Spectrum
This setting is used to enable or disable the Spread Spectrum feature. W hen
overclocking, always set it to [Disabled].
Important
1. If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the
value of Spread Spectrum for EMI reduction.
2. The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum
value, please consult your local EMI regulation.
3. Remember to disable Spread Spectrum if you are overclocking because
even a slight jitter can introduce a temporary boost in clock speed which may
just cause your overclocked processor to lock up.
BIOS Setup
3-23