Table of Contents
Advertisement
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
PCI IDE BusMaster
Set this option to [Enabled] to specify that the IDE controller on the PCI local bus
has bus mastering capability.
RAID Mode (for ICH9R only)
The SATA RAID Mode supports RAID0,1,5,10. If AHCI is chosen, it allows you to
enable SATA Stagger Spinup Support(not RAID mode) and take all hard disks on
board as master.
I/O Devices
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
This item specifies the base I/O port addresses of the onboard Serial Port 1
(COM 1). Selecting [Auto] allows AMIBIOS to automatically determine the correct
base I/O port address.
BIOS Setup
3-13
Hide quick links:
Advertisement
Table of Contents
