Tidying Cables - LG LM96 Series Owner's Manual

22
ASSEMBLING AND PREPARING
CAUTION
y Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
y Use a dedicated power cord. Do not modify or
extend the power cord.
y If you install the TV on a ceiling or slanted
wall, it may fall and result in injury. Use an
authorized LG wall mount bracket and
contact the local dealer or qualified
personnel.
y Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
y Use the screws and wall mount bracket that
meet the VESA standard. Any damages or
injuries by misuse or using an improper
accessory are not covered by the
manufacturer's warranty.
NOTE
y Use the screws that are listed on the VESA
standard screw specifications.
y The wall mount kit includes an installation
manual and necessary parts.
y The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
y For more information, refer to the manual
supplied with the wall mount bracket.
y The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.

Tidying cables

47/55/60LM96 **
1
Gather and bind the cables with the cable
management.
Cable management
2
Gather and bind the cables with the cable
holder on the TV back cover.
Cable holder
CAUTION
y Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.