Operating Your Electronic Air Cleaner - Honeywell F50F Owner's Manual

F50F AND F300E ELECTRONIC AIR CLEANERS

OPERATING YOUR ELECTRONIC AIR CLEANER

Turn the On-Off switch on the power box to On.
NOTE: Set the switch to 1 for On and set the switch to O for
Off.
The air cleaner now operates whenever your furnace/air
M3584
conditioning system fan operates. For maximum air cleaning
benefit and cleaner air conditioner coils, leave the air cleaner
switch turned on at all times and the thermostat fan switch set
to On. Of course, continuous fan operation adds to your electric
bill each month. Check your equipment for the amount of
electricity needed to run your System fan.
When the fan and air cleaner come on, the neon indicator lights.
M3586
You may occasionally hear a snapping (electrical arcing) sound
as the air cleaner operates. The source is larger dust particles
that cause a high voltage discharge.The snapping sound
means that your air cleaner is working as it should.
The switch remains in the On position to keep the air cleaner
running.
When the fan and air cleaner stops, the neon light goes off.The
air cleaner is off until the heating or air conditioning and fan start
M3585A
again.
If you do not want the air cleaner to run, set the On-Off switch to
Off to turn off the air cleaner. Your furnace and air conditioner
continue to operate normally, but without the added benefit of
air cleaning. Normally, this switch should be turn to On at all
times.
M3583
3 69-0756-3