Before You Call For Service - Honeywell F50F Owner's Manual

F50F AND F300E ELECTRONIC AIR CLEANERS

BEFORE YOU CALL FOR SERVICE

If...
Electronic air
cleaner doesn't
seem to be working
Arcing (snapping)
seems too frequent
Neon light on air
cleaner does not
come on
You smell ozone
and find it
objectionable
69-0756-3
Then...
1. Make sure the furnace or air conditioner blower is
running.
2. Make sure the access door is firmly closed and latched. If
door is not closed properly, an interlock keeps the air
cleaner off.
1. If the electronic cell(s) are wet from washing, turn the air
cleaner off for two to three hours.
2. Check the cell(s) for broken ionizer wires or bent plates.
Repair if necessary.
3. Wash cell(s) and prefilter(s) if dirty.
1. Make sure the furnace or air conditioner fan is running.
2. Make sure the access door is firmly closed.
3. Make sure the On-Off switch is in the On position.
4. On models without the Solid State Performance Indicator,
if the electronic cell(s) are wet, check again in two to
three hours.
Call your heating and air conditioning dealer.
14