Using Acc - Ford Mondeo 2007 Owner's Handbook Manual

Adaptive cruise control (ACC)
WARNING
You must take immediate action
once alerted, as the ACC
braking will not be sufficient to keep
a safe distance to the vehicle in front.

USING ACC

The system is operated by
adjustment controls mounted on the
steering wheel. The system is
deactivated when the brakes or
clutch are used, the gear selector is
moved to a neutral position or if the
accelerator pedal is depressed for a
longer period. The system will
change to standby mode, allowing
you full manual control of the vehicle.
Note: If the accelerator is depressed
for a short period, for example when
overtaking, the system is temporarily
deactivated and then reactivated
when the accelerator pedal is
released. ACC override is
displayed in the information display.
E
D
E82310
A ACC on/off
B ACC cancel
C
D
E
Switching ACC on
Press switch A. The system is set to
standby mode and Standby is
displayed in the information display.
Setting a speed
E70615
Note: The system must be in
Standby mode.
Press the SET+ switch or the SET-
A
switch to select your desired cruise
speed. The speed is displayed in the
information display and stored as the
set speed. The ACC indicator
B
illuminates.
Note: Vehicle speed may be
increased and decreased at intervals
of 5 km/h or 5 mph. Smaller
C
increases of 1 km/h or 1 mph may be
set by pressing the RES switch.
165
Forward alert on/off
ACC gap increase
ACC gap decrease