Honeywell RTH6500WF Wi-Fi Series User Manual page 53

System setup
(See page 48 for instructions.)
Function
3
Heating Fan
Control
5
Heating Cycle
Rate
6
Heating Cycle
Rate Stage 2
12
Manual/Auto
Changeover
See page 47 for
more information.
Settings & Options
0 Gas or oil heat: Use this setting if you have a gas or oil heating system
(system controls fan operation).
Electric heat: Use this setting if you have an electric heating system
1
(thermostat controls fan operation).
Gas or oil furnace: Standard gas/oil furnace (less than 90% efficiency).
5
Electric furnace: Electric heating systems.
9
3 Hot water or high-efficiency furnace: Hot water system or gas furnace
(more than 90% efficiency).
Gas/oil steam or gravity system: Steam or gravity heat systems.
1
0 Manual changeover (Heat/Cool/Off).
1 Automatic changeover (Heat/Cool/Auto/Off). Automatically turns on Heat
or Cool based on room temperature. Note: System maintains minimum
3°F difference between heat and cool settings.
51
69-2718EF—03