Video Playback - Loewe Aventos 3781 ZW Operating Instructions Manual

Operating additional equipment

Video playback

In order to see the VCR picture on your TV and
hear its sound you have several possibilities:
1. You can use the Euro-AV sockets on the TV
set and on the VCR. This is the best option of
all – good picture and sound quality.
If you are playing back from a VCR with
Digital Link Plus, the VCR picture is shown on
the current channel slot.
If you are playing back from a standard VCR,
DVD player or camcorder, select the AV
socket to which the video signal is connected
in the AV selection list or the channel table.
Video recorders emit a switching voltage
during playback which the TV set can decode
(can be activated for every VCR in the con-
nection wizard). Then the VCR picture is
shown on the current channel slot as in Dig-
ital Link Plus VCR's.
2. You use the antenna connection between the
VCR and the TV set. The sound is only broad-
cast in mono. To do this, select the first menu
item, e.g. VCR, in the AV selection list.
Launch the AV channel via the AV selection
0
Launch AV selection list
AV Selection
VIDEO AV1 AV2 AV3 AVS
Select AV socket or VIDEO for
VCR transmitter.
Now you will see the playback from the con-
nected AV unit.
Launch the AV channel via the channel
overview
OK
Launch the channel table
Channel overview: TV
AVS 6 S–RTL
AV3 7 N–TV
AV2 8 DSF
AV1 9 TM3
0 VIDEO 10 PRO7
1 ARD 11 RTL 2
2 ZDF 12 WDR 3
3 SAT.1 13 BR 3
4 RTL 14 HR
5 VOX 15 MDR 3
0 ... 9 Select program:
Change programs
Select and
Favourite programs
press OK to proceed
O K
Change sorting
In the numerical sorting you will always find the
AV sockets at the top of the list without channel
numbers.
Mark the AV socket
Now you will see the playback from the con-
nected AV unit.
Numerical
i
Info
M Menu
E End
19