Daily Handling; Switching On/Off; Changing Channels - Loewe Aventos 3781 ZW Operating Instructions Manual

Daily handling

Switching on/off

Your TV set is equipped with an eco-standby
power supply unit. The power consumption drops
to low power in standby mode. If you want to
save even more energy, switch the set off with
the On/Off switch. However, please note that
EPG data are then lost and timer recordings
programmed on the TV set will not be carried
out.
If the TV is switched on, you can
switch it off with the blue On/Off
button on the remote control.
The red standby LED on the set
lights up. If the green (blue) LED
also lights, a timer recording is
in progress, EPG data is being
acquired or radio mode without
screen display is active.
From standby it is best to switch
back on with the blue On/Off
button or with a numeric key
(channel 0-9). The green (blue)
operating LED then lights up.
When you switch on the TV with
OK
OK, you see the channel table
and can choose a channel.
Switch on in the radio mode.
None of the indicators lights up
when you switch off the TV set
with the On/Off button on the
set.
Switch on the TV set with the On/
Off button on the set when it is
switched off.
10

Changing channels

Channels up/down (only favorite
stations if these are shown in the
station table).
With the numeric keys on the remote control
The set has a dynamic memory with 220/with DVB
1470 memory slots. If up to 9 channels are stored,
you only need to enter one number, up to 99 two
numbers, up to 999 three numbers and above 999
four numbers (please look in the channel table to
find out how many channels have been stored).
1-digit channels
Keep the button 0 – 9 pressed for
one second, the channel then
changes immediately.
or press the button 0 – 9 briefly,
7
the channel then changes after 2
seconds (immediately when up to 9
long
channels are stored).
2-digit channels
2 7
Keep the second numeric key
pressed for one second, the chan-
short long
nel then changes immediately.
or press both numeric keys briefly,
the channel then changes after 2
seconds (immediately when up to
99 channels are stored).
3-digit channels
1 2 7
Keep the third numeric key pressed
for one second, the channel then
short short long
changes immediately.
or press the three numeric keys
briefly, the channel then changes
after 2 seconds (immediately when
up to 999 channels are stored).
4-digit channels
1 2 7 8
Press the four numeric keys
briefly, the channel then changes
all short
immediately.
Depending on how many channels have been
stored, you can place one or more zeros in front
of the number and select for example channel 7
= 07 or 007 or 0007.
About the channel table
Launch the channel table with
OK
OK
Channel overview: TV
AVS 6 S–RTL
AV3 7 N–TV
AV2 8 DSF
AV1 9 TM3
0 VIDEO 10 PRO7
1 ARD 11 RTL 2
2 ZDF 12 WDR 3
3 SAT.1 13 BR 3
4 RTL 14 HR
5 VOX 15 MDR 3
0 9
... Select program:
Change programs
Select and
Favourite programs
press OK to proceed
O K
Change sorting
mark the channel
(the marked channel is shown
in the PIP picture
or
0 9
Mark with numeric keys
...
OK
Launch the marked channel
Sort alphabetically/numerically
(blue button)
Channel overview: TV
ARD HOT
HR
BR-ALPHA
BR3 KIKA
CNN INT. MDR 3
DSF N–TV
EUROSPRT N24
N3
✳ABCDEFGHIJKLMNOPQRSTUVWXYZ
Change programs
Select and
Favourite programs
press OK to proceed
O K
Change sorting
Display favourite channels only
(yellow button)
Launch Audio/Video programs
– AV selection
for playing AV equipment (see
0
also page 19).
AV Selection
VIDEO AV1 AV2 AV3 AVS
Select AV socket or VIDEO for
VCR transmitter.
Numerical
i
Info
M Menu
E End
✳
)
Alphabetical
i Info
M Menu
E End