7 – 8 Teletext mode Video mode Initial installation Batteries – remote control Operating additional equipment 18 – 20 Connection Logging in and connecting Switching on AV equipment Initial installation Video playback Loewe video recorders and direct operation of Loewe DVD players...
Remote control – TV functions Radio mode on/off Indicator: Operate VCR Control 150 Indicator: operate DVD Picture menu Direct operation Switch on/off select for VCR/DVD/TV – in standby mode PIP operation on/off Sound off/on (Mute) EPG operation on/off Video operation with video operating line on/off Select programme directly...
Control panel Connections on the right side of the TV set To display menu Channel up/down – /in a menu: adjust On/Off key Video input AVS Audio input Operating indicator (Y/C, CVBS) (white=left, red= right) Standby indicator Headphones socket Video input AVS (CVBS)
Dolby digital module Antenna socket for picture-in-picture (PIP). STAND Insert antenna plug of your antenna or cable installation here. Connection for Connection for subwoofer in the stand, special subwoofer retrofittable Loewe active loudspeaker systems Dolby digital module or Home Automation...
For your own safety For your own safety and in order to avoid • Like every piece of electronic equipment, • Avoid dropping metal objects, needles, unnecessarily damaging your TV set, please your TV needs air for cooling. Obstructing paper clips, liquids, wax or similar into the read and observe the following safety the air supply to the set can cause fires.
Page 8
TV set. A We recommend you to use only original power cable with defective insulation can parts, e.g. Loewe racks and stands. lead to electric shocks and is a fire risk. If the TV set is placed on a console with •...
(PIP), plug the antenna plug protruding Finally log in your video recorders, decoders, from above the PIP antenna socket into the Loewe audio system and Home Automation antenna socket for the VHF/UHF tuner. Plug the with the connection wizard and connect these...
Daily handling Switching on/off Changing channels About the station table Call the station table with OK Your TV set is equipped with an eco-standby Channels up/down (only favorite power supply unit. The power consumption drops stations if these are shown in the to low power in standby mode.
Daily handling Adjusting the sound Adjusting the picture General menu operation Adjusting the volume Call the Picture menu With the TV and picture menus, we show you how Call the TV menu to navigate within the menus. Which buttons you Adjust the volume can use for operation is shown at the bottom of TV menu...
Modes of operation Picture in Picture (PIP) Setting ”iPIP” Station scan Switch on PIP, call the PIP menu with the M The frame around the PIP picture Standard PIP functions: button. must be green. If it is not, press In standard PIP, a PIP picture is displayed in the Mark the green button.
Modes of operation EPG mode mark a station you want to watch (currently Calling detailed information running), memorize or record. If detailed information about the selected station EPG is the electronic program guide for TV is available, you will see the T-button displayed Fri 03.08./20:08 programs.
Page 15
Modes of operation EPG settings If, for example, you cannot receive any EPG Selecting stations for EPG providers and no DVB is installed in the TV set, Select the stations here for which information is If you want to change the provider or want to you should switch off the data acquisition.
Modes of operation Teletext mode Displaying teletext pages Other functions for selecting pages Mark a specified page number Stop self-turning pages (HOLD) Teletext transmits information such as News, on the page (Page Catching) Weather, Sport, Program Previews and Subtitles. zoom: top half– bottom half – Teletext on/off werden .
(not for satellite controlling Loewe VCRs via the Euro-AV cable. If programs). the Loewe VCR only has Digital Link, the TV tuner Select the video control bar if is used for recording. If you have installed your Video menu several VCR’s or a DVD player...
Switch on the test station on the VCR or insert a Name VIDEO TV stand. camcorders, DVD players, Loewe audio system, When the station is found: recorded tape and start playback. Col. st. Autom. Pay-TV decoders, Loewe home automation,...
Operating additional equipment Video playback Calling an AV program in the AV selection In order to see the VCR picture on your TV and list hear its sound you have several possibilities: 1. You can use the Euro-AV sockets on the TV Call AV selection list set and on the VCR.
Page 20
You can switch over the remote control of the 20 seconds until the remote control automatically the VTR indicator on the TV set to operate Loewe video recorders and switches back to TV mode (none of the indicators remote control lights up ...
PIN in the TV menu - Settings. information cannot be called Control of the Loewe VCR with the video a) The VCR’s Digital Link function is not activated a) Activate Digital Link in the VCR (see operating...
Page 22
The item ”Sound from...” in the Sound menu a) Change the setting to ”TV”. under ”Sound” is not set to ”TV” b) Either a dummy plug with bridges, Loewe b) Nothing is inserted in the 9-pole cube socket active loudspeaker system, the transmitter...
72 cm, sichtbar 68 cm design, user guidance and technical characteris- 9-pole cube socket active loudspeaker systems tics to Loewe TV sets with the result that daily Mini-DIN 8-pole Service or Loewe audio systems Electrical data handling of the equipment is made much sim-...
Need help?
Do you have a question about the Mimo 28 and is the answer not in the manual?
Questions and answers