To Set Unit To Heat Mode; To Select The Fan Direction - Daewoo DSB-071LH Owner's Manual

TO SET UNIT TO HEAT MODE

To set the unit to heat the room to a desired temperature, follow the procedures below:
1. Press the ON/OFF button on
the remote control to turn the
unit on; the On LED will light
on the indoor unit and "ON"
will light in the remote display.
3. Using the TEMP. or
tons, set the desired temper-
ature. The desired tempera-
ture can be changed up to
32°C and down to 18°C.
NOTE:
When the heating orperation is started, hot air delivery might be delayed due to warm up period.

TO SELECT THE FAN DIRECTION

Regardless of the mode the unit is set for, the fan direction can be changed so it moves up and down, left and right or
both. Follow procedures below to set fan direction.
1. Press the ON/OFF button on
the remote control to turn the
unit on; the On LED will light
on the indoor unit and "ON"
will light in the remote display.
3. Press the FAN DIR. button to
select the fan direction. See
chart below for detailed infor-
mation on each of the three
settings.
FAN DIR. First Press
Second Press
but-
FAN DIR.
23
2. Press the MODE button until the Heat
indicator appears in the display.
In the heat mode, the fan direction
(UP, DOWN) is further downward
than that in the cool mode for the good circulation.
4. To select the fan speed, press the
FAN SPEED button until the desired
speed appears in the display (see
below).
FAN SPEEDS
"AUTO" The fan will automatically select the fan
speed.
" " The fan will operate on low speed.
" " The fan will operate on medium speed.
" " The fan will operate on high speed.
"NATURAL" The fan will randomly cycle through the
speeds simulating a cool breeze.
2. Press the MODE button to select the
desired mode.
The air will flow up and down.
Normal air direction.