Table of Contents
Advertisement
Table of Contents
Warnings & Important Safety Instructions_____________________________________________________3
Dimensions __________________________________________________________________________________6
Specifications ________________________________________________________________________________8
Clearance Dimensions (Proximity to Cabinets) _______________________________________________10
Clearance Dimensions (Wood/Composite Overlay)___________________________________________11
Electrical & Gas Requirements ______________________________________________________________12
General Information ________________________________________________________________________14
Installation __________________________________________________________________________________15
Door Removal __________________________________________________________________________15
Leg Installation _________________________________________________________________________16
Electrical Connection (3 Wire) ___________________________________________________________17
Electrical Connection (4 Wire) ___________________________________________________________19
Leveling/Adjustments/Alignment________________________________________________________21
Anit-tip Device Installation ______________________________________________________________22
Connecting Gas & Electrical ____________________________________________________________23
Final Installation ________________________________________________________________________24
Door Replacement and Adjustment _____________________________________________________25
Final Preparation____________________________________________________________________________26
Performance Checklist ______________________________________________________________________26
Service & Registration ______________________________________________________________________27
2
IMPORTANT-
Read and Follow!
Your safety and the safety of others is
• Before beginning, please read these
very important.
instructions completely and carefully.
We have provided many important safety
messages in this manual and on your
• Do not remove permanently affixed labels,
appliance. Always read and obey all
warnings, or plates from product. This may
safety messages.
• All local and national codes and ordinances
must be observed. Installation must
All safety messages will be preceded by
conform with local codes or in the absence
the safety alert symbol and the word
of codes, the National Fuel Gas Code ANSI
"DANGER," "WARNING" or "CAUTION."
Z223.1-latest edition.
These words mean:
• The installer must leave these instructions
with the consumer who should retain for
local inspector's use and for future
reference.
In Canada: Installation must be in accordance
with the current CAN/CGA B149.1 & 2 Gas
Installation codes and/or local codes. Electrical
which COULD result in severe personal
installation must be in accordance with the
current CSA C22.1 Canadian Electrical Codes
In Massachusetts: All gas products must be
COULD result in minor personal injury or
installed by a "Massachusetts" licensed
plumber or gasfitter. A "T" type handle
manual valve must be installed in the gas
supply line to the appliance.
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
3
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death.
WARNING
Hazards or unsafe practices
injury or death.
CAUTION
Hazards or unsafe practices which
property damage.
All safety messages will identify the
the instructions are not followed.
Advertisement
Table of Contents
