Installing A Module; Sim Card; Inserting The Sim Card - Fujitsu Siemens Computers LIFEBOOK S Series Easy Manual

Installing a module

► Place the module into the module bay so that the contacts enter first.
► Push the module into the module bay until you feel it locking into place.

SIM card

Follow the instructions supplied by the provider of the SIM card.

Inserting the SIM card

► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, flat and clean surface. If necessary, lay
an anti-slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see Section
► Reinstall the battery (see
► Turn the notebook the right way up and place it on a flat surface.
► Reconnect the cables that you disconnected previously.
A26391-K233-Z120-1-7619, edition 1
"Removing the battery", Page
a
2
1
"Installing battery", Page
Ports and operating elements
16).
► Slide the SIM card into the slot (1) (with the
contacts facing upwards) until it engages.
► Slide the clip (a) of the SIM card in the
direction of the arrow (2).
17).
21