Motech LPS 305 User Manual page 5

Under certain conditions, dangerous voltages may exist even with power cable removed. To avoid
injuries, always disconnect power, discharge circuits and remove external voltage sources before
touching components.
DO NOT SERVICE OR ADJUST ALONE
Do not attempt internal service or adjustment unless another person, capable of rendering first aid and
resuscitation, is present.
DO NOT EXCEED INPUT RATINGS
This instrument must be connected to a properly grounded receptacle to minimize electric shock
hazard. Operate at line voltages or frequencies in excess of those stated on the data plate may cause
leakage currents in excess of 5.0mA peak.
SAFETY SYMBOLS
WARNING
CAUTION
!
DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT
Because of the danger of introducing additional hazards, do not install substitute parts or perform any
unauthorized modification to the instrument. Return the instrument to a qualified dealers for service
and repair to ensure that safety features are maintained.
INSTRUMENTS WHICH APPEAR DAMAGED OR DEFECTIVE SHOULD BE MADE INOPERATIVE
AND SECURED AGAINST UNINTENDED OPERATION UNTIL THEY CAN BE REPAIRED BY
QUALIFIED SERVICE PERSONNEL.
The WARNING sign denotes a hazard. It calls attention to a procedure,
practice, or the like, which, if not correctly performed or adhered to, could
result in personal injury. Do not proceed beyond a WARNING sign until the
indicated conditions are fully understood and met.
The CAUTION sign denotes a hazard. It calls attention to a procedure,
practice, or the like, which, if not correctly performed or adhered to, could
result in damage to or destruction of part or all of the product. Do not proceed
beyond a CAUTION sign until the indicated conditions are fully understood
and met.
Chassis ground symbol
Protective Conductor terminal
Caution, risk of electric shock
2