Instructions For; Race N Play Wireless Controller - Pelican Wireless Race ‘N Play PL-673 User Manual

Instructions For

Race N Play Wireless Controller

1. Make sure your PlayStation® 2 is turned off.
2. Remove the battery lids using the supplied
screw driver and place 2 AA batteries (not includ-
ed) into the Race N Play Wireless Controller.
Make sure the batteries are inserted as shown in
the battery compartment.
Remove
screw with
supplied
screw driver
3. Select a Channel for the controller. You may
select any channel you desire 1, 2, or 3. In most
cases you can leave the channel set to position 1.
9.