Page 2
(2) this device must accept any interference received, including interference that may cause unde- sired operation. Pelican and its logo are registered trademarks. XBOX is a registered trademark of Microsoft Corp. Xbox® is a registered trademark of Microsoft Corp.
CD/DVD load and read mechanism, internal operating system, nor the cabinet of the video game system. This warranty will not apply if the Pelican controller is not used as directed in the product manual enclosed. For further information or help please contact us toll free at (800) 331-...
Product Layout Blade 2.4 Street Controller Relocated Black & White Buttons Action Buttons Left Analog Stick Black Button Directional White Button Back Start Button Button...
Page 6
Receiver/Transmitter Unit Top View Connect Button Signal LED Side View...
Overview Wireless Blade 2.4 Street controller uses advanced 2.4 GHz technology and Channel-Hopping which gives you the ability to play without the limitations and hassles of typical corded controllers and switch-dependent controllers. All of this gives you lightning fast control over...
Features & Benefits Auto On/Off: The controller will automatically go to sleep mode after 3 mins. of no action. Holding the START button for 5 sec- onds also sends the controller to sleep. Touch any of the four action buttons (A,B,X,Y), START, or BACK to power up your new wireless controller.
Page 9
Battery Compartment: 2.4 Street controller requires the use of two AA batteries (not included). The batteries were placed in between the triggers making the 2.4 Street controller’s weight perfectly balanced. Double check and make sure batteries are inserted correctly. Power Save Mode: When not in use for 3 min the 2.4 Street controller auto- matically goes into a sleep mode to conserve batteries.
Directions 1. Make sure your Xbox® is turned off. 2. Remove the battery lid and place 2 AA batteries into the 2.4 Street Wireless controller. Make sure the batteries are inserted as shown in the battery compartment. 3. Insert the receiver into the Xbox® controller slot of your choice and power up the Blade Street and then your Xbox®.
Troubleshooting If you are having difficulties with your new 2.4 Street controller please refer below: My system turns on but I don’t see anything on the TV. 1. Check to verify that your A/V cable is properly connected to your system. 2.
5 years from the date of purchase. If a defect covered by this warranty occurs during this period, Pelican at its option will repair or replace, at no charge, any part that Pelican determines to be defective. To obtain warranty service during the warranty period, send the defective product postage pre-paid, with a money order for $4.00 (in...
Page 13
For technical questions please visit http://www.pelicanperformance.com or call us directly at: 1-800-331-3844...
Need help?
Do you have a question about the Blade 2.4 Street and is the answer not in the manual?
Questions and answers