Connecting Speakers - RCA PRO-SW100P Quick Manual

Connecting to Subwoofer Out
or Pre Out Terminals
Use this connection if your amplifier/
receiver has jacks labeled SUBWOOFER
OUT or PRE OUT. Do not use the PRE
OUT jacks if they are already connected by
cables or jumpers to your amplifier.
Amplifier/Receiver
Right
Speaker
Sub Out/Pre Out Terminal
HIGH LEVEL INPUT
HIGH LEVEL OUTPUT
+ R – – L +
+ –
HIGH LEVEL INPUT
+ R - + L -
LOW LEVEL
POWER
STANDBY
RED
+ R - + L -
HIGH LEVEL OUTPUT
1. Connect the PRO-SW100P’ s
jacks to the amplifier/
LEVEL INPUT
receiver’ s sub out or pre out jacks (or
TV’ s audio line out jacks).
2. Connect your satellite speakers (if
any) to the amplifier’ s or receiver’ s
output terminals as they would
normally be connected.
Notes:
• On some receivers/amplifiers, the
subwoofer out is a single jack. Use a
single phono cable (not supplied) to
connect the subwoofer jack to the “L”
input on the PRO-SW100P.
• When connecting to a TV, we
recommend using variable line output
jacks, which will allow the PRO-
SW100P’ s volume to change with the
TV’ s volume. Refer to your TV owner’ s
manual. Also, you can connect to the
Connecting to Speaker
Terminals
Connect the amplifier/receiver’s speaker
Left
Speaker
output terminals to the PRO-SW100P’s
Rec Out HIGH LEVEL INPUT
L
sure to connect the terminals in phase,
R
connecting positive (+) to positive and
negative (–) to negative. To match the
subwoofer’s polarity with your system’s
+ –
polarity and receive full bass response,
slide the
PHASE
INPUT
FREQUENCY
VOLUME HZ
L
REV NORM
Choose the setting that provides the
CONTROL 80
60 100
150
R
50 200
MIN MAX
greatest bass output.
LOW

Connecting Speakers

You can connect your left and right
speakers to your amplifier/receiver (as
shown in “Connecting to Subwoofer Out
or Pre Out Terminals” ), or to the PRO-
SW100P’s
terminals (as shown above).
4
TV line out and then adjust the TV
volume up or down. If the subwoofer
volume changes with the TV volume,
then the TV line out is variable.
speaker terminals. Be
switch to
PHASE
Right
Amplifier/Receiver
Speaker
Output Terminal
HIGH LEVEL OUTPUT
HIGH LEVEL OUTPUT
or .
REV NOM
Left
Speaker
PHASE
REV
NOM
speaker