Page 5
RTF INCLUDING RTF including: fuselage wing elevator landing gear Vertical stabilizer plastic parts set Hardware Elevator edf set glue decal balance charger LI-Po battery (11.1V 2200mAh 20C) transmitter Adaptor Cockpit...
Page 6
As shown,Insert the speed As shown,Fix the EDF set on controllers into fuselage. fuselage with 3X40mm screw. As shown,Glue the horizontal As shown, Apply the foam glue on stabilizer in place. the joiner of the left and right horizontal stabilizer. Insert the vertical stabilizer into As shown,Fix the vertical stabilizer on the fuselage.
Page 7
As shown, Insert speed controller As shown, Insert Z-bend of pushrod wires into THR channel of receiver. into the hole of the nose landing gear. As shown, Apply the foam glue to the As shown,Fix the nose landing gear stuffing foam and insert it into fuselage on fuselage with 2.5X8mm screw.
Page 8
Apply the foam glue on the joiner of the As shown,Glue left and right main wings left and right wings. together. As shown, Apply the foam glue to the As shown,Apply the foam glue on the stuffing foam and insert it into wing as plastic part and insert it in the main wing shown.
Page 9
STICK OPERATION MODE 1 MODE 2 MOVEMENT THROTTLE RUDDER control plane airplane action movement ELEVATOR control plane movement airplane action AILERONS airplane action Aileron movement airplane action...