Vivotek FD8156 User Manual page 94

VIVOTEK
■ Event name: Enter a name for the event setting.
■ Enable this event: Select this option to enable the event setting.
■ Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher
priority setting will be executed first.
■ Detect next motion detection or digital input after
motion detection after a motion is detected. This can prevent event-related actions to be too frequently
performed.
1.
Schedule
Specify the period of time during which the event trigger will take place. Please select the days of the
week and the time in a day (in a 24-hr time format) for the event triggering schedule.
2. Trigger
This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can
be configured to use the Network Camera's built-in motion detection mechanism or external digital input
devices.
There are several choices of trigger sources as shown on next page. Select the item to display the
detailed configuration options.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source. To enable this
function, you need to configure a Motion Detection Window first. For more information, please refer to
Motion Detection on page 107 for details.
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999
minutes are allowed.
■ System boot
This option triggers the Network Camera when the power to the Network Camera is disconnected.
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to rewrite older data.
94 - User's Manual
seconds: Enter the duration in seconds to pause