Vivotek FD8156 User Manual page 149

s<0~(m-1)>_mjpeg_maxfram
e
s<0~(m-1)>_mjpeg_qvalue
s<0~(m-1)>_mjpeg_qpercent
s<0~(m-1)>_mjpeg_bitrate
s<0~(m-1)>_forcei
flickerless
7.6.1.1 Alternative video input profiles per channel
In addition to the primary setting of video input, there can be alternative profile video input setting for
each channel which might be for different scene of light (daytime or nighttime).
Group: videoin_profile_i<0~(m-1)> (capability. nvideoinprofile > 0)
NAME
enable
policy
begintime
1~25,
26~30 (only for
NTSC or 60Hz
CMOS)
10~200
1~100
1000~400000
00
1
0~1
VALUE DEFAULT
<boolean> 0
schedule schedule
hh:mm 18:00
10 1/4
49 4/4
50 4/4
14000000 4/4
N/A 7/6
0 4/4
SECURITY DESCRIPTION
(get/set)
4/4 Enable/disable this profile setting
4/4 The mode which the profile is
applied to.
4/4 Begin time of schedule mode.
29
VIVOTEK
"ratecontrolmode".
1 = worst quality, 5 = best
quality.
100: Use the quality level in
"qpercent"
99: Use the quality level in
"qvalue"
Set maximum frame rate in
fps (for JPEG).
Manual video quality level
input.
(s<0~(m-1)>_mjpeg_quant =
0)
Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_mjpeg_quant =
100)
Set bit rate in bps when
choosing cbr in
"ratecontrolmode".
Force I frame.
Turn on(1) or turn off(0) the
flickerless mode
User's Manual - 149