CARE AND CLEANING
TO CLEAN THE INSIDE OF OUTER AND INNER GLASS PANELS
Warning: Always switch your appliance OFF at the mains supply and allow to cool before cleaning.
Fig. 1
Fig. 2
Fig. 3
DOOR
RUBBER
INNER
GROMMETS
PANEL
Fig. 4
1. Position top or main oven door as shown in fig. 1.
Note: The door can be wedged open using a towel between
the door and the side trim thus leaving your hands free.
2. Grip inner door panel and handle/outer glass assembly.
3. Pull handle/outer glass assembly at the top outwards
TWO SCREWS/
WASHERS
4. Return the inner door panel to the closed position as
DOOR
OUTER
Warning: Care must be taken when closing the door inner
DOOR
GLASS &
panel as the door will attempt to snatch shut, without the
FIXING
HANDLE
TAG
weight of the handle/outer glass assembly avoid trapping
your fingers.
5. The inside of inner and outer door glass can now be
6. Refit the handle/outer glass assembly by opening the
Never operate the ovens without the outer glass panels cor-
rectly refitted.
Remove two screws and fibre washers (put to one side)
as shown in fig. 2.
while still holding the inner door panel and unhook
handle/outer glass assembly at the bottom by lifting
handle/outer glass assembly upwards as shown in fig. 3.
Take care not to dislodge rubber grommets in bottom
of door.
shown in fig. 4.
cleaned using a clean, damp cloth and polished using
a clean, dry cloth.
oven door and hold taking care not to trap your fingers,
see fig. 3. Hook the handle/outer glass assembly back into
the rubber grommets at the bottom of the inner door
panel, see fig. 3.
Fit the handle/outer glass assembly back in position
at the top ensuring the fixing tags on the handle/outer
glass assembly fit inside the door inner panel. While still
holding door together, refit the two screws and washers,
see fig. 2.
31