Auto Standby; Set Display Brightness; Apply Factory Settings; Update Software - Philips HTL6140B User Manual

Note
•
This product supports WMA files which are converted
via Windows Media Player (WMA files converted via
other file format converters may not work).
•
If a USB storage device has a large media library, it takes
some time to load those contents.
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3, WMA) are not
supported.
•
Support a USB port: 5V

Auto standby

When playing media from a connected device,
the SoundBar automatically switches to standby
after 29 minutes of button inactivity and no
audio/video play from a connected device.

Set display brightness

You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.

Apply factory settings

You can reset this product to the default
settings programmed at the factory.
1
In any source mode, on the remote control
press Volume -, BASS -, and TREBLE - in
sequence within three seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
EN
12
1A.

5 Update software

To get the best features and support, update
your product with the latest software.

Check software version

In HDMI ARC source, on the remote control
press TREBLE -, BASS -, and Volume - in
sequence.

Update software via USB

1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a Unzip the download if zipped, and
make sure that the unzipped file is
named "HTL6140.BIN".
b Put the "HTL6140.BIN" file in the
root directory.
3
Connect the USB storage device to the
(USB) connector on this product.
4
Switch this product to HDMI ARC source.
5
On the remote control, within six seconds
twice then Volume + once, and
press
then hold down SURROUND ON.
» "UPG" (upgrade) blinks on the display
panel.
6
Press to start the upgrade.
» Then "UPG" (upgrade) is displayed on
the display panel.
7
Wait until the upgrade is completed.
» If the upgrade is complete, this product
automatically turns off and on again.