Connect Bluetooth Via Nfc; Mp3 Player; Usb Storage Devices - Philips HTL6140B User Manual

• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
or press
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•
If you want to connect your SoundBar with another
Bluetooth device, press and hold
to disconnect the currently connected Bluetooth device.

Connect Bluetooth via NFC

NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
• A Bluetooth device with NFC function.
• For pairing, tap the NFC device on the
NFC tag of the SoundBar.
1
Enable NFC on the Bluetooth device (see
the device' s user manual for details).
2
Tap the NFC device onto the NFC tag of
the SoundBar until the SoundBar beeps.
• For first time connection, on some
mobile devices prompt for pair-up
appears, select "YES" for connection.
» When the Bluetooth connection
succeeds, BT is displayed on the display
panel.
» If the connection fails, BT on the
display panel blinks continuously.
3
Select and play audio files or music on
your NFC device.
/ to skip to a track,
to pause/resume play.
on the remote control
• To break the connection, tap again the
NFC device onto the NFC tag on the
SoundBar.

MP3 player

Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUX IN
connector on your SoundBar.
2
Press repeatedly AUX on the remote
control until AUDIO IN is displayed on the
display panel.
3
Press the buttons on the MP3 player to
select and play audio files or music.

USB storage devices

Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
• An MP3 or WMA file on a USB storage
device
1
Connect a USB storage device to this
product.
2
Press USB on the remote control.
3
Use the remote control to control play.
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
USB
During USB play, press repeatedly to
select a repeat or shuffle mode, or
turn off a play mode.
EN
11