Related Manuals for Philips HTL6140S
Summary of Contents for Philips HTL6140S
- Page 1 Always there to help you Register your product and get support at www.philips.com/support HTL6140B HTL6140S Question? Contact Philips User manual...
-
Page 3: Table Of Contents
Contents 8 Troubleshooting 1 Important Help and support Safety Care for your product Care of the environment Compliance 2 Your SoundBar Main unit Remote control Connectors Wireless subwoofer 3 Connect and set up Pair up with the subwoofer Placement Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices 8 4 Use your SoundBar... -
Page 4: Important
• Before you connect the product to the For extensive online support, visit power outlet, ensure that the power www.philips.com/support to: voltage matches the value printed on the • download the user manual and the quick back or bottom of the product. Never... -
Page 5: Care For Your Product
Risk of contamination! Care of the environment • Do not mix batteries (old and new or carbon and alkaine, etc.). Disposal of your old product and battery • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. •... -
Page 6: Compliance
2 Your SoundBar Compliance Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your This product complies with the radio SoundBar at www.philips.com/support. interference requirements of the European Community. Hereby, Gibson Innovations declares that... -
Page 7: Remote Control
(Previous/Next) Remote control Skip to the previous or next track in USB mode. This section includes an overview of the (Play/Pause) remote control. • Start, pause or resume play in USB mode. e BASS +/- Increase or decrease bass. f Volume control •... -
Page 8: Connectors
Connectors Wireless subwoofer This section includes an overview of the The SoundBar comes with a wireless subwoofer. connectors available on your SoundBar. a HDMI OUT (ARC) - TO TV Connect to the HDMI input on the TV. a CONNECT (connect) Press to to enter the pairing mode for the b HDMI IN subwoofer. -
Page 9: Connect And Set Up
3 Connect and set Placement Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. This section helps you connect your SoundBar For best results, place your subwoofer as shown to a TV and other devices, and then set it up. -
Page 10: Connect Digital Devices Through Hdmi
Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital device to the HDMI IN on your SoundBar. Connect your SoundBar to TV through HDMI OUT (ARC). • If the TV is not HDMI CEC compliant, select the correct video input on your On the connected device, turn on HDMI- Using a High Speed HDMI cable, connect... -
Page 11: Use Your Soundbar
4 Use your Option 2: Connect audio through analog audio cables SoundBar Basic quality audio This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. -
Page 12: Play Audio Through Bluetooth
On the Bluetooth device, switch on Press AUDIO SYNC +/- to synchronize Bluetooth, search for and select PHILIPS the audio with the video. HTL6140 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). -
Page 13: Connect Bluetooth Via Nfc
• If your Bluetooth device supports MP3 player AVRCP profile, on the remote control you can press to skip to a track, Connect your MP3 player to play your audio or press to pause/resume play. files or music. To exit Bluetooth, select other source. •... -
Page 14: Auto Standby
• Support a USB port: 5V Update software via USB Check the latest software version on Auto standby www.philips.com/support. • Search for your model and click on "Software and drivers". When playing media from a connected device, the SoundBar automatically switches to standby... -
Page 15: Wall Mount
6 Wall mount Caution • Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this product. Before you mount your SoundBar on the wall, read all safety precautions. Note •... -
Page 16: Product Specifications
Main unit • Total output power: 320W RMS • Power supply: (+/- 0.5 dB, 10% THD) • Model (Philips branded AC power • Frequency response: 20 Hz-20 kHz / adapter): DYS602-210309W; ±3 dB AS650-210-AA309 • Signal-to-noise ratio: > 65 dB (CCIR) / •... - Page 17 Bluetooth connection via If you still have a problem, get support at the NFC tag (if available). www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect.
- Page 18 Audio and video are not synchronized. • For some Bluetooth, the Bluetooth Press AUDIO SYNC +/- to synchronize • connection can be deactivated the audio with the video. automatically to save power. This does not indicate any malfunction of the SoundBar. Error message is displayed on the display panel.
- Page 19 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. © 2013 CSR plc and its group companies. The aptX mark and the aptX logo are ® trade marks of CSR plc or one of its group companies and may be registered in one or Manufactured under license under U.S.
- Page 20 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.