Wifi Network Name And Password; Manual Method - NETGEAR JNR1010v2 Installation

WiFi Network Name and Password

The preset WiFi network name (SSID) and password (network
key) are unique to your router, like a serial number. Because the
router automatically uses WiFi security, you don't need to set it
up. The WiFi settings are on the product label.
NETGEAR recommends that you use the preset WiFi settings
because you can check the product label if you forget them.
NETGEAR genie lets you change these settings. If you do so, write
down the new WiFi settings and store them in a safe place.
Find the preset WiFi settings on your router and record them here:
WiFi network name (SSID)
Network key (password)
If you change the WiFi settings, write the new settings here for
easy reference and store this booklet in a safe place.
WiFi network name (SSID)
Network key (password)
April 2014
Join the Router's WiFi Network
To connect your computer or WiFi device (such as a smartphone or
gaming device) to your router's WiFi network, you can use either
the manual method or Wi-Fi Protected Setup (WPS) method.

Manual Method

1. Open the software utility that manages your WiFi connections
on the computer or WiFi device that you want to connect to
your router.
This utility scans for all wireless networks in your area.
2. Find and select your router's WiFi network name (SSID).
The SSID is on the product label.
3. Enter the router's password (or your custom password if you
changed it) and click the Connect button.
The password is on the product label.
4. Repeat Step 1 through Step 3 to add other computers or WiFi
devices.
WPS Method
If your computer or WiFi device supports WPS, you can use WPS
to join the router's WiFi network. For help with the WPS button
on your computer or WiFi device, check the instructions or online
help that came with that computer or WiFi device. Some older
equipment cannot use WPS.
Note: WPS does not support WEP security. If you are using WEP
security, use the manual method.
1. Press the WPS/Reset button on the router with the end of a
paper clip or a similar object for one to three seconds.
The WiFi LED
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
blinks green.
2. Within two minutes, on your computer or WiFi device, press
its WPS button or click its onscreen WPS button.
The WPS LED on the router lights solid green when the
computer or WiFi device connects to your router.
3. Repeat this process to add other computers or WiFi devices.
Reset Router to Factory Settings
You can return the router to its factory settings. Use the end of
a paper clip or a similar object to press and hold the WPS/Reset
button on the back of the router for at least four seconds. The
Power LED blinks green. The router resets and returns to the
factory settings.
Support
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number on the label
of your product and use it to register your product at
https://my.netgear.com. You must register your product before
you can use NETGEAR telephone support. NETGEAR recommends
registering your product through the NETGEAR website.
For product updates and web support, visit
http://support.netgear.com. NETGEAR recommends that you use
only the official NETGEAR support resources.
You can get this installation guide in multiple languages and the
user manual online at http://downloadcenter.netgear.com
through a link in the product's user interface.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the
power supply.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
or