Fujitsu PRIMERGY RX300 S6 Options Manual page 57

Removing the dummy module
I
If you want to upgrade from the Local Service Panel to the Local Service
Display, remove the Local Service Panel in the same way as the dummy
module, and remove the cable when you have pulled the Local Service
Panel right out.
Figure 26: Unlocking the dummy module
Ê Unlock the dummy module.
Ê Push the dummy module frontward.
I
Carefully push the dummy module out horizontally to avoid damaging the
EMC springs.
RX300 S6
Options Guide
Installing LSP or LSD
57