TC Electronic Stereo Chorus/Flanger & Pitch Modulator User Manual page 11

FRONT DESCRIPTION
9 OUTPUT
(STEREO)
10 BYPASS
11 EX. BYPASS
12 LED INDICATOR The LED at the top of the unit
12
Outputs the right channel
of the stereo effects signal.
Switches the audio signal into or
around the effects circuitry.
By connecting a simple momentary
switch here, the bypass function can
be remote controlled.
indicates the sweep rate (as set by
SPEED) with effect on.
In BYPASS mode the LED "glows" at a
low levels indicating "power on".