Samsung HT-H5500W User Manual page 43

Symptom
dolby digital 5.1 CH
Surround Sound is not
produced.
The remote control does not
work.
The disc is rotating but
●
there is no picture.
picture quality is poor and
●
the picture is shaking.
Audio language and subtitles
do not work.
The menu screen does not
appear even when you select
the menu function.
The aspect ratio cannot be
changed.
The product is not
●
working.
(Example: The power goes
off or you hear a strange
noise.)
The product is not
●
working normally.
you have forgotten the
rating level password.
Can't receive radio
broadcasts.
There is no sound when
you try to listen to Tv audio
through the home theater
speakers.
"Not Available" appears on
screen.
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
●
Sound is produced only if the disc is recorded with 5.1 channel sound.
Is the audio language correctly set to Dolby Digital 5.1-CH in the information
●
display?
Are you operating the remote within its operational range and within the proper
●
angle relative to the sensor?
Are the batteries drained?
●
Have you selected the mode (TV/BD) functions of the remote control (TV or BD)
●
correctly?
Is the TV power on?
●
Are the video cables connected properly?
●
Is the disc dirty or damaged?
●
A poorly manufactured disc may not be playable.
●
The Audio Language and subtitle functions will not work if the disc does not
●
contain multiple language sound tracks or subtitles.
Are you using a disc that does not contain menus?
●
You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode,
●
or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only.
Refer to the Blu-ray Disc jacket, and then select the appropriate function.
Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
●
This will reset the unit.
- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
With no disc in the product, press and hold the product's 5 button for longer
●
than 5 seconds. INIT appears on the display and all settings will return to their
default values.
- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
Is the antenna connected properly?
●
If the antenna's input signal is weak, install an external FM antenna in an area
●
with good reception.
If you press the ^ button while listening to TV audio using the d. IN or AUx
●
functions, the Blu-ray/DVD disc functions are turned on and the TV audio is
muted.
The features or action cannot be completed at this time because:
●
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn't support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of range.
43
- English
Check/Remedy