Replacing The Internal Speaker - Lenovo ThinkStation S30 Hardware Maintenance Manual

5. Remove the screw that secures the front audio and USB assembly bracket, and then remove the
bracket from the chassis.
Figure 36. Removing the front audio and USB assembly
6. Position the front audio and USB assembly bracket into the chassis, and then align the screw hole in
the bracket with the corresponding hole in the chassis. Install the screw to secure the front audio and
USB bracket to the chassis.
7. Reconnect the front audio and USB assembly cables to the front audio connector and the front USB
connector on the system board. See "Locating parts on the system board" on page 78.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 117.

Replacing the internal speaker

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important Safety
Information" on page 1.
This section provides instructions on how to replace the internal speaker.
Note: The internal speaker is only available on some models.
.
Chapter 10 Replacing FRUs
105