Lantronix xPrintServer Quick Start Manual page 2

4 SETTING UP GOOGLE CLOUD PRINT™ WITH YOUR XPRINTSERVER
1– Launch and log in to the Admin interface in your xPrintServer—There are 2 ways to get to the Admin interface:
NOTE: Your device (smartphone/tablet/PC) must be on the same network (WiFi/wired) that your xPrintServer is on.
a) Scan QR code on the underside of your xPrintServer-Use a QR code reader on your Android™ smartphone or tablet
to read the QR code on the underside of the xPrintServer. The QR code reader will display a link. Select this link to
go directly to the Admin interface of the xPrintServer. A login window will pop-up for you to enter a username and
password. If you don't have a QR code reader app, one can be downloaded for free from Google Play™ store (most QR
code readers will work, however the ZXing Team based QR code reader is recommended).
or
b) Go to FindMyXPS.com using a web browser - Go to FindMyXPS.com with a smartphone, tablet or PC web browser.
Enter the serial number (SN 12 alphanumeric characters) printed on the QR code label on the underside of your
xPrintServer. A login window will pop-up for you to enter a username and password.
xPrintServer default USER NAME= admin, PASSWORD= PASS (case sensitive). You can change these once logged in to the xPrintServer.
2– After you log in, you will see the Quick Setup page. Click the
Quick Setup button to begin the setup.
4– A new, secure Google® webpage will
open up for you log in to or create a
Google account. If you recently logged in
to Google, the window in the next step will
open up. NOTE: Only one Google account
can be an xPrintServer admin at a time.
If more than one person needs access to
admin functions, consider using a Google
account that can be shared.
Cloud Print Edition Quick Start Guide
3- Register with Google® by clicking the link that will auto-generate.
It may take a few seconds for the link to auto-generate.
5– Complete the Google registration by clicking
the "Finish Printer Registration" button.
QR Code label on
your xPrintServer
QR Code
6– The next page will contain a "Manage
Your Printers" link. You do not need to
click on this link. Instead go back to the
xPrintServer Admin browser window. It
should be open in a previous browser tab.
Serial #